Port Setup - ZyXEL Communications ES-2024 Series User Manual

Table 10 Basic Setting > IP Setup (continued)
LABEL
Default
Gateway
Delete
Cancel

8.7 Port Setup

Use this screen to configure Switch port settings. Click Basic Setting > Port
Setup in the navigation panel to display the configuration screen.
Figure 36 Basic Setting > Port Setup
The following table describes the labels in this screen.
Table 11 Basic Setting > Port Setup
LABEL
Port
*
Active
ES-2024 Series User's Guide
DESCRIPTION
This field displays the IP address of default gateway.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the Delete check boxes.
DESCRIPTION
This is the port index number.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports.
Use this row first to set the common settings and then make adjustments
on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
Select this check box to enable a port. The factory default for all ports is
enabled. A port must be enabled for data transmission to occur.
Chapter 8 Basic Setting
81