Troubleshooting - ZyXEL Communications ES-2024 Series User Manual

Click Apply to save your changes back to the run-time memory.
5
Figure 29 Tutorial: Set DHCP Server and Relay Information
Click the Save link in the upper right corner of the web configurator to save your
6
configuration permanently.
The DHCP server can then assign a specific IP address based on the DHCP
7
request.

6.1.4 Troubleshooting

Check the client A's IP address. If it did not receive the IP address 172.16.1.18,
make sure:
Client A is connected to the Switch's port 2 in VLAN 102.
1
You configured the correct VLAN ID, port number and system name for DHCP relay
2
on both the DHCP server and the Switch.
You clicked the Save link on the Switch to have your settings take effect.
3
ES-2024 Series User's Guide
Chapter 6 Tutorials
63