Yamaha YZF-R1R Owner's Manual page 67

Table of Contents

Advertisement

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Quick fastener (× 4)
Cowling A
To remove the cowling
1. Remove the quick fasteners at the
front of the cowling.
6
1. Quick fastener screw (× 6)
2. Screw
EAU04544
3. Bolt (× 2)
2. Remove the bolts and screw, and
then loosen the quick fastener
screws 1/4 turn counterclockwise.
3. Slide the cowling backward at the
area shown.
6-9
1. Turn signal light lead coupler
2. Screw (× 2)
4. Disconnect the turn signal light
lead coupler.
5. Remove the screws, and then take
the cowling off.
To install the cowling
1. Install the screws.
2. Connect the turn signal light lead
coupler.
3. Place the cowling in the original
position.
4. Install the screw and the bolts,
tighten the quick fastener screws,
and then install the quick fasten-
ers.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yzf- r1rcR1 yzf-r1rR1 yzf-r1rc

Table of Contents