Replacing A Turn Signal Light Bulb; Replacing The License Plate Light Bulb - Yamaha YZF-R1R Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Screw
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
6 by removing the screw.
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
CAUTION:
_
Do not overtighten the screw, other-
wise the lens may break.
_
EAU03497
6-43
ECA00065
1. Screw (× 2)
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
EAU04574