Yamaha YZF-R1R Owner's Manual page 30

1. Engine speed indicator light
2. "SELECT" button
3. "RESET" button
Display brightness and
speed indicator light control mode
This mode cycles through five control
functions, allowing you to make the fol-
lowing settings in the order listed be-
low.
1. Display brightness: This function
allows you to adjust the brightness
of the multi-function display to suit
the outside lighting conditions.
INSTRUMENT AND CONTROL FUNCTIONS
2. Engine speed indicator light activi-
ty: This function allows you to
choose whether or not the indica-
tor light should be activated and
whether it should blink or stay on
when activated.
3. Engine speed indicator light acti-
vation: This function allows you to
select the engine speed at which
the indicator light will be activated.
4. Engine speed indicator light deac-
tivation: This function allows you
engine
to select the engine speed at
which the indicator light will be de-
activated.
5. Engine speed
brightness: This function allows
you to adjust the brightness of the
indicator light to suit your prefer-
ence.
NOTE:
_
G
G
_
indicator light
3-8
To make any settings in this mode,
you have to cycle through all of its
functions. However, if the key is
turned to "OFF" or the engine is
started before completing the pro-
cedure, only the settings made be-
fore the "SELECT" button was last
pushed will be applied.
In this mode, the multi-function
display shows the current setting
for each function (except the en-
gine speed indicator light activity
function).
3