Table of Contents
Advertisement
Replacing
Belt
Remove worn or broken belt.
Belt
Courroie
Correa
Motor
Shaft
Arbre d'entraTnment
du moteur
Eje del motor
_nd
Cap
Ouverture
Bouchon
Ranura
Tapa del extrerno
Loop new belt (Panasonic Type UB8
onlv) around motor shaft and belt
pulley; see illustration for correct
belt routing.
Reinstall agitator back into nozzle
housing grooves.
After reinstalling the agitator, turn it
by hand to make sure that belt is not
twisted or pinched and that all
rotating parts turn freely.
>_ Reinstall lower plate.
Cleaning Agitator
>_ Clean agitator after every five uses
and every time the belt is replaced.
Remove lower plate.
Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors.
>_ Remove agitator.
>_ Remove any string or debris located
on the end caps.
>_ Reinstall agitator and lower plate.
- 30 -
Advertisement
Table of Contents
