Panasonic MC-UG589-00 Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Vacuum Cleaner
  5. MC-UG589-00
  6. Service manual
Panasonic MC-UG589-00 Service Manual

Panasonic MC-UG589-00 Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Order Number MAC0803006CE

Vacuum Cleaner

MC-UG589-00
Specifications are subject to change without notice for further improvement.
©
2008
PANASONIC
HOME
APPLIANCES
COMPANY,
DIVISION
OF
PANSONIC
CORPORATION OF NORTH AMERICA. All rights
reserved. Unauthorized copying and distribution is a
violation of law.

Advertisement

Table of Contents
loading

Related Manuals for Panasonic MC-UG589-00

Summary of Contents for Panasonic MC-UG589-00

  • Page 1: Vacuum Cleaner

    Order Number MAC0803006CE Vacuum Cleaner MC-UG589-00 Specifications are subject to change without notice for further improvement. © 2008 PANASONIC HOME APPLIANCES COMPANY, DIVISION PANSONIC CORPORATION OF NORTH AMERICA. All rights reserved. Unauthorized copying and distribution is a violation of law.

  • Page 2: Table Of Contents

    MC-UG589-00 CONTENTS Page Page 1 WIRING DIAGRAM AND DRAWING 3.1. Lower Plate Replacement 1.1. Wiring Diagram 3.2. Belt Replacement 1.2. PICTORIAL DIAGRAM 3.3. Agitator Assembly Replacement 2 EXPLODED VIEW AND PARTS LIST 3.4. Carpet/Bare Floor and Handle Release Assembly 2.1. Body 3.5.

  • Page 3: Wiring Diagram And Drawing

    MC-UG589-00 1 WIRING DIAGRAM AND DRAWING 1.1. Wiring Diagram...

  • Page 4: Pictorial Diagram

    MC-UG589-00 1.2. PICTORIAL DIAGRAM NOTE: For general servicing, it is necessary to eliminate pinching of any wire during reassembly. After servicing any electrical component or electrical enclosure, the unit should be reassembled and checked for dielectric breakdown or current leakage.

  • Page 5: Exploded View And Parts List

    MC-UG589-00 2 EXPLODED VIEW AND PARTS LIST 2.1. Body 2.1.1. Exploded View...
  • Page 6 MC-UG589-00 2.1.2. Parts List (Body) Ref. No. Part No. Part Name & Description Quantity Remarks AC78KDABZV07 DUST COMPARTMENT INCLUDES ITEMS AC70PJPZV07 WAND HOLDER INCLUDES ITEM 3 AXTN4+16BFY SCREW (WAND HOLDER) SHIPPED 10 PER PACKAGE AMC98E-V010U SWITCH INCLUDES AMC62E-J20 CORD STOPPER...

  • Page 7: Nozzle Housing

    MC-UG589-00 2.2. Nozzle Housing 2.2.1. Exploded View...
  • Page 8 MC-UG589-00 2.2.2. Parts List (Nozzle Housing) Ref. No Part No. Part Name & Description Quantity Remarks AC01ADEYZSU0 Nozzle Housing Includes item 7 AC10ACRSZV07 Furniture Guard AC21HCRSZ000 Window AMC25S-V00 Plastic Shaft AC34PAJDZV06 Nozzle Hose AC42AAFYZV06 Pedal AC04RANPZV06 Nozzle Packing AC92BAMAZ000 Handle Release Assembly...

  • Page 9: Packing Materials

    MC-UG589-00 2.3. Packing Materials 2.3.1. Exploded View 2.3.2. Parts List (Packing Materials) Ref. No. Part No. Part Name & Description Quantity Remarks AC61ZCRJZ000 Packing Assembly Includes 1 and items a thru f AC01ZDEYZ000 Operating Instructions...

  • Page 10: Replacement Instructions

    Installation 3.1.2. Installation 1. Loop new belt (Panasonic Type UB8 only) around motor 1. Close the rear belt cover. shaft and agitator pulley; see illustration for correct belt 2. Hook the front of the lower plate into the slots on the front routing.

  • Page 11: Agitator Assembly Replacement

    MC-UG589-00 3.3. Agitator Assembly Replacement 3.3.1. Removal 1. The brushes are replaceable separately. When the brushes need replacing, the agitator assembly will have to be removed. 2. Remove the lower plate as outlined in the LOWER PLATE REPLACEMENT section. 3. Remove the agitator assembly as outlined in the BELT REPLACEMENT section.

  • Page 12: Headlight Bulb Replacement

    MC-UG589-00 across the lower plate. If the bristles on the agitator assembly do not touch the card you should replace all the brushes for best cleaning results. 7. Install new brushes by reversing procedure. 8. Reinstall agitator holder and agitator pulley completely.

  • Page 13: Power Cord / On-Off Switch Replacement

    MC-UG589-00 3.7. Power Cord / On-Off Switch Replacement 3.7.1. Removal 1. Remove the dust cover and switch cover to expose the electrical connections of the power cord, on-off switch and wire cord. 3. Ensure that the insulator packing is installed correctly.
  • Page 14 MC-UG589-00 instructed in the respective removal sections. 3. Turn the vacuum over to the front side. 4. Remove the four (4) screws from the motor case and then remove the motor case. 5. Disconnect the motor leads and remove the motor. Remove the motor support rubber (rear), noise suppressor, cooling guide, motor flange, and the motor support rubber (front).

Table of Contents