Mac Filtering Rules - D-Link DGL-5500 User Manual

Section 3 - Configuration
Use MAC Filters to allow or deny local computers/devices by their MAC addresses from accessing the network. You can either
manually add a MAC address or select the MAC address from the list of clients that are currently connected to the router.
Configure MAC Select Turn MAC Filtering Off, Turn MAC Filtering ON and ALLOW
Filtering: computers listed to access the network, or Turn MAC Filtering
ON and DENY computers listed to access the network from the
drop-down menu.
MAC Address: Enter the MAC address of the computer or device you would like
to filter.
To find the MAC address on a computer, please refer to the
Networking Basics section in this manual.
DHCP Client List: Select a DHCP client from the drop-down menu and click << to
copy that MAC Address.
Save: Click Save to save your entry.
Clear: Click Clear to erase your current entry.
MAC Filter List: This section will list your current entries.
Note: If you enable filtering and create an "allow" list, you must add
the computer or device you are currently using to the list or you will be
blocked when the router reboots.
D-Link DGL-5500 User Manual

MAC Filtering Rules

49