Network Settings; Router Settings - D-Link DGL-5500 User Manual

Section 3 - Configuration
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
Router IP Address: Enter the IP address of the router. The default IP address
is 192.168.0.1. If you statically assign your network clients,
make sure to use the new IP address as the Default
Gateway address.
If you change the IP address, once you click Save Settings,
you will need to enter the new IP address in your browser
to get back into the configuration utility.
Enter the Subnet Mask. The default subnet mask is
Default Subnet
Mask: 255.255.255.0.
Device Name: Enter a name for the router. Note that if you change the
name, you must use it the next time you want to log in to
the router (i.e., http://dlinkrouter.local./).
For example, if you change the router name to myrouter,
to log in, you must enter http://myrouter.local./.
Local Domain Enter the Domain name (Optional).
Name:
Enable DNS Relay: Uncheck the box to transfer the DNS server information
from your ISP to your computers. If checked, your
computers will use the router for a DNS server.
D-Link DGL-5500 User Manual

Network Settings

Router Settings

36