Table of Contents
Advertisement
Chapter 2 Configuration
To access MAC Filtering, point to the Advanced Wireless on the left window and click MAC Filtering submenu, or click the MAC
Filtering button in the Wireless Settings window.
This page can help you to allow or deny certain MAC addresses
to pass through or block out.
Click Add at the bottom of the window to enter MAC address.
Click Apply at the bottom of the page to add the MAC address
to the wireless MAC filtering list.
Select Enable Wireless MAC Filter and click the only ALLOW
computers listed to access wireless network or only DENY
computers listed to access wireless network of the filtering
policy. Click Apply to save the settings. Go to Maintenance ->
System and click Reboot to restart the device and let the new
settings take effect.
D-Link DVA-G3672B User Manual
Advanced Wireless – MAC Filtering
32
Advertisement
Table of Contents
