Configure Wpa/Wpa2-Enterprise (Radius) - D-Link DGL-5500 User Manual

Ac1300 gaming router
Table of Contents

Advertisement

Section 4 - Security
It is recommended to enable wireless security on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption.
1. Log in to the web-based configuration by opening a web browser
and entering http://dlinkrouter.local./. Click on Setup and then
click Wireless Settings on the top.
2. Next to Security Mode, select WPA-Enterprise.
3. Next to WPA Mode, select Auto(WPA or WPA2), WPA2 Only, or
WPA Only. Use Auto if you have wireless clients using both WPA
and WPA2.
4. Next to Cypher Type, select TKIP and AES, TKIP, or AES.
5. Next to Group Key Update Interval, enter the amount of time before
the group key used for broadcast and multicast data is changed (3600 is default).
6. Next to RADIUS Server IP Address enter the IP Address of your RADIUS server.
7. Next to RADIUS Server Port, enter the port you are using with your RADIUS server. 1812 is the default port.
8. Next to RADIUS Server Shared Secret, enter the security key.
9. Click Advanced to enter settings for a secondary RADIUS Server.
10. Click Save Settings to save your settings.
D-Link DGL-5500 User Manual

Configure WPA/WPA2-Enterprise (RADIUS)

35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents