D-Link DGL-5500 User Manual page 14

Section 2 - Installation
5. Plug the power adapter into your router and connect to an available power outlet or surge protector. If the
Power LED does not light up, press the Power button on the back of the router.
6. After the router has powered up, verify that the power (green) and Internet (orange or green) LEDs are both lit.
Please skip to page 18 to configure your router and use the manual setup procedure to configure your network
and wireless settings. If you did not connect to the Internet, use the D-Link Setup Wizard (refer to page 14).
D-Link DGL-5500 User Manual
USB
WPS
1
2
LAN
3
4
INTERNET
Power Button
POWER
12V 2A
Modem
DGL-5500
Computer
10