Items Related To Vtr Operations (000S - Sony DVW-A500/1 Service Manual

Menu List

Items Related to VTR Operations (000s)

The values enclosed in a box are factory settings.
Item number Item
001 PREROLL TIME
002 CHARACTER
(DVW-A500/1 H-POSITION
and 500/1)
002 CHARACTER
(DVW-A500P/1 H-POSITION
and 500P/1)
CHARACTER
003
(DVW-A500/1 V-POSITION
and 500/1)
003 CHARACTER
(DVW-A500P/1 V-POSITION
and 500P/1)
004 SYNCHRONIZE
005 DISPLAY
INFORMATION
SELECT
A-8
Appendix
Settable range Function
0 sec
00
Selects the preroll time. A preroll time of 0 to 30 seconds
l
l
can be selected. Though generally set to 3 seconds or
[05] [5 sec]
longer, preroll time of 5 seconds or longer would be
l
l
recommended for phase synchronization by an edit
30
30 sec controller.
00 00 Sets the horizontal screen position of the superimposed
l l characters output from the SERIAL V/A OUTPUT 4(SUPER)
[14] [14]
or COMPOSITE VIDEO OUTPUT 3(SUPER) connector. A
l l hexadecimal value of 00 indicates the far left of the screen,
24 24 and 24 (decimal 36) the far right. Increasing the value moves
the starting position to the right.
00 00 Sets the horizontal screen position of the superimposed
l l characters output from the SERIAL V/A OUTPUT 4(SUPER)
[12] [12]
or VIDEO OUTPUT COMPOSITE 3(SUPER) connector. A
l l hexadecimal value of 00 indicates the far left of the screen,
22 22 and 22 (decimal 34) the far right. Increasing the value
moves the starting position to the right.
00 00
Sets the vertical screen position of the first line of
l l
superimposed characters output from the SERIAL V/A
[56] [56]
output 4(SUPER) or VIDEO OUTPUT COMPOSITE
l l
3(SUPER) connector. A hexadecimal value of 00 indicates
6A 6A
the top of the screen, and 6A (decimal 87) the bottom.
Increasing the value lowers the position of the characters.
00 00
Sets the vertical screen position of the first line of
l l
superimposed characters output from the SERIAL V/A
[6A] [6A]
OUTPUT 4(SUPER) or VIDEO OUTPUT COMPOSITE
l l
3(SUPER) connector. A hexadecimal value of 00 indicates
81 81
the top of the screen, and 6F (decimal 111) the bottom.
Increasing the value lowers the position of the characters.
[0] [on]
Specifies phase synchronization of the two VTRs in phase
off synchronization, when the units are connected with a 9-pin
1
remote cable with an editing system with this unit as the edit
controller.
0: Operates in phase synchronization
1: Does not operate in phase synchronization
[time data status]
[0]
Determines the information to be displayed as
&
time data & UB
1 superimposed characters output from the SERIAL V/A
2 time data & CTL
OUTPUT 4(SUPER) or VIDEO OUTPUT COMPOSITE
3 time data & time
3(SUPER) connector.
data
0: Time counter display information and VTR status.
4 time data only
1: Time counter display information and user bits.
5 replay indicate
2: Time counter display information and CTL.
3: Time counter display information and time code (LTC or
4: Time code (LTC or VITC) only.
5: "R" (replay) is displayed during DT playback mode.
VITC).