Key Beep; Weather Alert Setup - Furuno FM-4000 Owner's Manual

12.9 KEY BEEP

Set the beep tone volume level when a key is pressed.
1. Press and hold down the [ CALL ( MENU )] key until
the "Radio Setup Radio Setup" menu appears.
Radio Setup Radio Setup
Radio Setup
2. Press the [ ENT ] key, then use the CHANNEL selec-
tor knob to select "Key Beep
3. Press the [ ENT ] key.
4. Turn the CHANNEL selector knob to select the de-
sired level. The beep can be set from "Level 1
"Level 6 Level 6," "High High," or "Off
Level 6 Level 6 Level 6 High High High
5. Press the [ ENT ] key to set the key beep condition.
6. To exit this menu and return to radio operation mode,
press the [ 16/9 ] key.
Emergency alarm and beeps for DSC operation cannot be turned OFF.

12.10 WEATHER ALERT SETUP

The NOAA Weather alert can be enabled or disabled. The default setting is
"On SCAN and WX CH."
1. Press and hold down the [ CALL ( MENU )] key until
the "Radio Setup Radio Setup" menu appears.
Radio Setup Radio Setup Radio Setup
2. Press the [ ENT ] key, then use the CHANNEL selec-
tor knob to select "Weather Alert
3. Press the [ ENT ] key.
4. Turn the CHANNEL selector knob to select the de-
sired WX alert mode. The WX alert mode can be
set to "On WX CH On WX CH," "On SCAN
On WX CH On WX CH
On WX CH
CH," or "Off
CH CH Off Off." Off
CH CH Off
5. Press the [ ENT ] key to store the selected setting.
6. To exit this menu and return to radio operation mode,
press the [ 16/9 ] key.
FM-4000
Key Beep Key Beep." Key Beep
Key Beep
Off Off Off." Off
NOTE
Weather Alert Weather Alert." Weather Alert
Weather Alert
On SCAN," "On SCAN and
On SCAN On SCAN On SCAN and On SCAN and
On SCAN On SCAN and WX On SCAN and
Level 1" to
Level 1 Level 1 Level 1
WX WX
WX WX
Page 61