Calling; Key Assignment; Number Of Soft Keys - Furuno FM-4000 Owner's Manual

13.2.2 Calling

Press and hold the [DW(IC)] key for one second when the "Intercom" mode is
active. A calling beep is emitted from the speaker.

13.3 KEY ASSIGNMENT

13.3.1 Number of Soft Keys

Three soft keys are set as default. However the Remote MIC allows assigning
of up to six soft keys with the instructions below:
1. Press and hold down the [ CALL ( MENU )] key
until "Radio Setup Radio Setup" menu appears.
Radio Setup Radio Setup
Radio Setup
2. Press the [ ENT ] key, then press the [ ] key
to select "SOFT Keys
SOFT Keys SOFT Keys SOFT Keys." SOFT Keys
3. Press the [ ENT ] key.
4. Press the [ ] or [ ] key to select "Number of
SOFT Keys" and press the [ ENT ] key.
SOFT Keys SOFT Keys
SOFT Keys SOFT Keys
5. Press the [ ] or [ ] key to select the number
of soft keys (3 3 3 3 3 , 4 4 4 4 4 , or 6 6 6 6 6 ) and press the [ ENT ]
key.
6. To exit this menu and return to radio operation mode,
press the [ 16/9 ] key.
FM-4000
Number of Number of Number of Number of
Page 71