Setting The Key Beep - Furuno LH-5000 Operator's Manual

LH-5000 Operator's Manual
A short tone sounds from the selected intercom speaker and the
corresponding information appears on the screen.
Press the PTT key on the microphone and speak into it.
Step 2
Release the PTT key to receive.
Step 3
After finishing your conversation, press the same selected key from
Step 4
IC 1 to IC 6 to return to the siren mode.
Talking with all intercom speakers in the siren mode
Press and hold any key from IC 1 to IC 6 on the front panel for two
Step 1
seconds.
All keys from IC 1 to IC 6 light red and a short one sounds from all
the intercom speakers.
Press the PTT key on the microphone and speak into it.
Step 2
Release the PTT key to receive.
Step 3
2.15

Setting the Key Beep

Press the MENU key on the front panel.
Step 1
Press the Up or Down key to select "KEY BEEP" and press the ENT
Step 2
key.
Press the Up or Down key to select "ON" or "OFF" and press the
Step 3
ENT key.
ON: You hear the beep when pressing the key on the front panel.

36
Operation Overview