Omega Excalibur AL-1000SH Owner's Manual page 3

Congratulations on your purchase of your new Excalibur security system and on
joining over 8 million people worldwide who have trusted their vehicle's security to
the designers of Omega Research & Development, Inc. To learn how to operate your
security system, please become familiar with the following three principal user
components: the Remote Transmitter, the Red LED Status Indicator and the Easy
Valet Switch.
The Remote Transmitter: Each security system comes with two pre-learned
transmitters, but can learn up to 4 different transmitters. The transmitter has three
buttons: one large button in the middle and two smaller buttons. This system is pre-
programmed, through a built-in learning routine, to have the transmitter buttons work
in the following configuration:
The large button is used to arm, disarm and panic the security system.
The small left button is used, in conjunction with the large button, to operate remote
sensor bypass, remote chirp elimination and remote valet. Used alone it operates
the channel #3 output.
The small right button can be used to operate the trunk release feature.
This advanced transmitter design, featuring Surface Acoustical Wave Technology
offers almost twice as much range as conventional systems. This helps overcome
problems encountered in urban areas due to excessive amounts of interference.
Introduction Introduction Introduction
Introduction Introduction
Page - 3
Continued Next Page