Omega Excalibur AL-1000SH Owner's Manual page 16

Table of Contents

Advertisement

observed by the driver. There are 12 possible conditions that the security system can
be in, and are reflected by the LED Status Indicator:
1) Off
2) On Constant
3) Flashing Slow
4) Flashing Fast
Automatic Transmitter Verification
turned "on", the LED Status Indicator will flash to indicate the number of transmitters
programmed to operate your security system. For example: two flashes and pause
indicates that only two transmitters are coded to operate your system. Whenever you
leave your vehicle and keys with someone, you will now have the peace of mind of
knowing that only your transmitters will operate the security system and that no
additional transmitters have been coded into your system for the purpose of stealing
your vehicle. This feature works for 10 seconds every time the ignition switch is turned
"on".
5) Flash-1x & Pause = 1 transmitter code is stored in the system's memory.
6) Flash-2x & Pause = 2 transmitter codes are stored in the system's memory.
7) Flash-3x & Pause = 3 transmitter codes are stored in the system's memory.
8) Flash-4x & Pause = 4 transmitter codes are stored in the system's memory.
= The security system is disarmed and not performing any
automatic functions.
= The security system is in the Valet Mode.
= The security system is Fully Armed.
= The 30 second Last Door Arming feature or 90 second
Automatic Rearming feature is in progress.
Page - 16
TM
(Patent Pending): After the ignition is

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents