Problem
... Continued
The PictBridge USB LED on the
front panel is flashing.
The USB LED on the front panel
does not come on even though a
USB device is connected to the
printer.
CLEARING PAPER JAMS
1
Firmly grasp the jammed paper and gently pull it out from where it jammed. If the paper tears, make
sure you remove all the torn pieces from the printer.
2
Press the Cancel button on the front panel to clear the error condition.
note: If the paper jam occurred when copying or printing without a computer, the print job will
continue from the next page.
If the jam occurred when using a computer, the pop-up screen displayed allows you to either continue
to print from the next page or to cancel the print job.
Possible Cause
•
A paper jam has occurred.
•
Your printer is receiving data
from the digital camera
connected.
•
The USB device connected to
the USB connector on the
front panel is not recognised
by the printer.
Corrective Action
•
Clear the paper jam. For
information see "Clearing
Paper Jams".
•
This is indication that the
data is being transferred
correctly.
No action is required.
•
Connect a USB device that
complies with the printer's
requirements for the
connection of USB devices.
MAINTENANCE AND TROUBLESHOOTING
41