Oki OJ2010 User Manual page 50

Clean the Carrier Contacts
Clean the Carrier Contacts
1) Open the OKI JET 2010 printer control dialog box.
2) Click the Cartridges tab.
3) Click Install Black Cartridge or Install Color Cartridge to move the print cartridge carrier
to the load position.
4) Unplug the printer power cord from the electrical outlet. DO NOT TURN THE PRINTER
POWER OFF before you unplug it.
This will force the print cartridge carrier to remain in the load position.
5) Remove the cartridges.
6) Use a CLEAN, DRY CLOTH to clean the contacts inside the cartridge carrier in the printer.
7) Replace the cartridges.
8) Plug the printer power cord into an electrical outlet.
9) Turn the printer power on.
10) Click Old Cartridge Installed .
Do NOT click New Cartridge installed: if you do, you'll reset the ink counter!
Test the cartridges by clicking Clean Print Nozzles on the Cartridges tab.
11)
If print quality has not improved after this cleaning process, replace your print
cartridge. If print quality still does not improve, your printer may require service.
OJ2010 ( 96-02-07 )