Oki OJ2010 User Manual page 49

Wipe the Nozzles and Contacts
Wipe the Nozzles and Contacts
If the print quality does not improve after repeating the nozzle test three times, there may
be dried ink on the print cartridge nozzles. To clean it off:
1) Remove the print cartridge (see steps 1 through 7 on page 40).
2) Use a clean cloth, dampened with water only, to gently clean the entire copper colored
area, including the nozzles and contacts.
When cleaning the color print cartridge, wipe the nozzles in one direction so the colors
do not mix.
Do not touch the copper-colored area with your fingers!
To dissolve any dried ink, hold the damp cloth against the nozzles for about three seconds.
Gently blot and wipe dry.
3) Allow the copper-colored area to dry.
4) Reinstall the cartridge and repeat the NozzleTest.
5) If the line is still broken, clean the contacts inside the print cartridge carrier in your
printer: to do this, go to step 4 (
OJ2010 ( 96-02-07 )
) on the next page.