Oki OJ2010 User Manual page 13

When You Are Prompted to Install the Print Cartridges
When you are prompted to install the print cartridges during the installation of the printer
software, follow the steps below
Note: The printer comes with two cartridges: one black and one color. The installation process
is the same for both. Each cartridge must be inserted into the correct position in the print cartridge carrier:
to do this, just match the color of the cartridge top to the color of the strips on the carrier: black to black
(black cartridge) and green to green (color cartridge).
1) Make sure the printer power is on.
2) Open the printer access cover.
3) Remove the black print cartridge from its packaging.
Note: Do not touch the copper-colored area! Hold the cartridge by the plastic
Surfaces only.
4) Carefully remove the tape covering the printhead on the print cartridge.
Be sure to remove all the tape.
Do not touch the copper-colored area!
5) Insert the black print cartridge in the carrier.
The print cartridges must be inserted in the correct position in the carrier: match the
black print cartridge handle to the black color strip on the carrier. (As youre facing the
printer, the black print cartridge is installed in the left-hand position.)
OJ2010 ( 96-02-07 )