Clear Data; Reset Advanced Settings; Find; Find & Go (Main Menu) - Audiovox NVX235W - Touch&Go - Automotive GPS Receiver User Manual

5.6.5.4

Clear Data

This button will delete all user data. It is a reset to factory settings. Tapping this
button means you lose all your saved data and customized settings. The NVX235W
Navigator will warn you about this.
5.6.5.5

Reset Advanced Settings

There are a multitude of advanced settings in The NVX235W Navigator. Some
changes may cause The NVX235W Navigator to behave in an unsatisfying manner.
Tap this button to restore the default settings.
6

Find

One of the most frequently used functions of The NVX235W Navigator is selecting
the destination. Once you have the destination, you can start navigating. Getting to
this point should be as fast as possible. The NVX235W Navigator provides you with a
versatile search engine designed to find your chosen destination after only a few taps
on the screen.
Note: If you select a location in any part of the Find system, you will normally drop
back to the map screen, where you will have several possible actions (set as start,
set as destination, add as via, continue route with, mark with a pin, or add as a POI
item). However, if you enter the Find system using the Find & GO button, The
NVX235W Navigator will immediately put you into Cockpit mode and start navigation.
6.1 Find & GO (Main menu)
As just mentioned, the fastest way to find your destination and start navigating is to
tap Find & GO in the Main Menu (4.1). This will put you on the Find screen, and as
soon as you pick a destination, The NVX235W Navigator will immediately show the
Cockpit screen and start navigation. This means that if you plan your route to one of
your Favorite destinations, you only need two taps to start navigating.
70