Related Manuals for Audiovox ECCO 128-8854
Summary of Contents for Audiovox ECCO 128-8854
- Page 1 ECCO Owner’s Guide Personal Pocket GPS Locator FOR ADDITIONAL SUPPORT, SERVICE AND INSTRUCTIONS, PLEASE GO TO WWW.AUDIOVOX.COM Copyright © 2010 AUDIOVOX ELECTRONICS CORPORATION. All Rights Reserved. #7,233,863 This product protected by US Patent 1/12 128-8854...
- Page 2 Vehicle Use Notice Audiovox is committed to safety and responsible use. Do not use this GPS device to navigate while driving a motor vehicle. Attention to this device while driving can distract the motor vehicle’s operator, creating an unsafe situation. Injury, death, or property dam- age may result if the operator fails to adhere to safe driving practices.
- Page 3 Return To A Stored Location e1 LED indicator d1 active GPS indicator d3 proximity ring d5 compass direction e2 lock button e4 USB port e6 key ring During battery charging mode, green LED blinks; then changes to steady when fully charged. During navigation,lights green for GPS signal, or red for: no GPS signal, off-course, opposite direction or no movement.
- Page 4 Before You Begin Note: The distance and times provided in this instruction guide are approximate measurements. Charge the Battery It takes 1.5 hours to fully charge the battery. The charge lasts 10 hours with typical use during active tracking or 16 days on standby. 1.
- Page 5 Calibrate - Important - Do Not Skip The unit stores magnetic data and automatically calibrates its digital compass; however, if the unit cannot provide correct heading information due to environment change (for example, near a metal structure), then it is recommended to manually calibrate the unit. It is also recommended to manually calibrate the unit for first-time use.
-
Page 6: Gps Information
Optional: Change Distance Unit System You have the option to change the distance unit system from English [feet (ft)/miles (mi)] to metric [meters (m)/kilometers (km)] or back again. Note: When instructed to “press and hold” a button, press down for at least 3 seconds. 1. - Page 7 Return to a Location 1. To wake the unit from Sleep, press Return (e3) for 1 second or until the LCD backlight comes on. The LCD message Ready appears. 2. To navigate to: • Last-locked position: simply press return button (e3). •...
-
Page 8: Additional Information
Additional Information Sleep Versus Off You can manually put the unit to Sleep or turn the device Off by using return (e3). • To put the unit to Sleep: press and hold return (e3) until the LCD message Sleep appears. •... - Page 9 Distance Units Displayed on the LCD When navigating toward a location, the LCD displays the nearest whole or hundredth of a unit measurement, depending on the distance from the location. Page 9 9/12 128-8854...
- Page 10 FAQs Searching will be completed quickly when the unit is Why is activated from the Sleep mode. If the unit is activated “Searching” from the Off state, Searching may take up to 2 completed quickly minutes to acquire a satellite signal. sometimes and takes longer other times?
- Page 11 Why aren’t the unit’s The unit may need to be charged, or if fully charged, it may features accessible? still be connected to the charging cable. None of the unit’s features are accessible if the charging cable is connected. Why is the LCD Occasionally, the arrow may briefly disappear (for example, directional arrow if you put the unit in your purse or pocket while navigating...
-
Page 12: Battery Warnings
When storing the unit for an extended time, store within the following temperature range: 14°F — 113°F (-10°C — 45°C). Do not attempt to remove the battery. To replace battery, contact Audiovox Electronics Corporation directly at www.audiovox.com Do not dispose of this product in regular waste.