Port/Starboard, Horizontal Slice Displays; Port/Starboard Display - Furuno CSH-23/24 Operator's Manual

PORT/STARBOARD, HORIZONTAL SLICE
The port/starboard display or horizontal slice display may be
displayed by pressing the [HIST] key. The display shown de-
pends on the setting of "HIST DSP/GRPH" in the USER menu.

Port/Starboard display

The port/starboard display takes echoes along the bearing (port,
starboard) selected on the SYSTEM menu and displays them on
the lower 1/3 of the screen. If the bearing width is set to 90
degrees, for example, the CSH-23/24 displays echoes in both
port and starboard directions. The picture is scrolled vertically
to downward.
- - -
- - -
Port/Starboard
- - -
- - -
Sampling Angle
B
Display
Sector
Picture Advance
Direction
Port Direction
Port/starboard sampling angle can be set between 0 and
A
180 degrees. Setting sequence: SYSTEM menu, HIST
DISPLAY, PRT/STBD Sample.
B Fixed at 6 degrees.
Figure 8-1 Port/starboard display
DISPLAYS
Starboard
Direction
8-1