Nvidia Frame Synchronization User Manual page 13

7 Click Apply.
The Sync and connection status group box indicates whether the display is genlocked to
the external signal. The status LEDs should be green, as shown in
Figure 2.4
•
•
Using the New NVIDIA Control Panel
If your driver version includes the new NVIDIA Control Panel, you can set up the
software as follows:
1 Right-click the desktop and then from the pop-up menu click NVIDIA Control Panel.
2 From the NVIDIA Control Panel Select a Category page, click Workstation.
3 From the Workstation page, click Synchronize Displays.
4 Under The timing server, click the On this system radio button.
5 Click Apply.
The graphics card should automatically detect the sync signal and no further action is
needed.
For further assistance on this or other tasks such as how to adjust the synchronization to
the external house sync, consult the online help by pressing F1 to open the Help file and
then opening the Workstation->Frame Synchronization contents.
NVIDIA Corporation
Frame Synchronization User's Guide – Version 3.0
Sync and Connection Status for a Genlocked System
If the Timing LED is red—indicating the display is not synchronized to the timing
signal—then see Synchronizing to the External House Signal
See "Understanding the Sync and Connection Status Indicators" on page 12
information about the status indicators.
NVIDIA Frame Synchronization
Figure 2.4.
for further instructions.
C 2
HAPTER
for more
9