Detailed Setup Instructions
Set Up the Hardware
1 Start the system, then connect the external source signal to the House Sync connector
(BNC) of the graphics card.
2 Check the LED on the connector panel.
•
•
Figure 2.2
Sync Source
Figure 2.2
NVIDIA Corporation
Frame Synchronization User's Guide – Version 3.0
A green LED means the hardware has detected the timing signal, and you can
proceed to the next step.
An occasional red flash is OK.
A red LED means the hardware can't detect the timing signal.
Check the signal source and correct the problem before proceeding.
illustrates a system that is connected to an external sync source.
Server
Example of Genlock Hardware Connections
Connector Bracket
NVIDIA Frame Synchronization
Quadro FX 3000G
Quadro G-Sync
C
2
HAPTER
7