Cisco Unity Express 8.0 Voice-Mail System User Manual page 7

Option
1
2
3
4
5
6
8
*
0
Setting Up and Using a Printer for Faxes
To identify the fax printer and print a fax:
Dial in to the Cisco Unity Express system, and press 1 to listen to messages.
Step 1
Step 2 Select the fax, then press 8 to send the fax to a local printer.
The system prompts you to enter the number of the fax printer.
Step 3 Perform one of the following actions:
•
If you pause before entering 1, the system prompt gives the number of the last printer (if any) that was
Note
set up.
•
•
If the number entered or chosen is not an acceptable fax printer, the system prompt indicates that the
Note
selected action cannot be completed.
OL-23857-01
Description
Repeat the fax properties.
Save the fax. See the Cisco Unity Express Voice-Mail System Quick Start Guide.
Delete the fax. See the Cisco Unity Express Voice-Mail System Quick Start Guide.
Reply, with a voice message, to the subscriber who sent the fax. See the Cisco Unity Express
Voice-Mail System Quick Start Guide.
Forward the fax. See the Cisco Unity Express Voice-Mail System Quick Start Guide.
Mark the fax as a new message. See the Cisco Unity Express Voice-Mail System Quick Start
Guide.
Send the fax to a local printer. See the
on page 7.
Cancel.
Help.
Press 1 to send to a currently configured fax printer.
Press 2 if there is no configured printer choice or to print to a different printer. Enter the phone
number of the fax printer then press #.
Press * to cancel printing the fax.
"Setting Up and Using a Printer for Faxes" section
Cisco Unity Express 8.0 Voicemail User's Guide for Advanced Features
Managing Fax Messages
7