Chapter 9 Digital Interface (Iec61162-1) - Furuno FR-2105 Operator's Manual

Chapter 9
1. I/O Sentences of Channel 1
Input
BWC, BWR, DBT, DPT, GGA, GLL, MWV, RMA, RMB, RMC, RTE, VDR,WPL, ZDA,
VTG (R-only)
Output
OSD (every 3 s), RSD (3 s)
2. I/O Sentences of Channel 2
Input
VBW, VHW, HDT
NOTE
Channel 2 serial port may be connected with a multiplexer interface box IF-2300 to feed Own
Ship speed, and Heading data.
3. I/O Sentence of Channel 3
Output
TTM (every 10 s when acquiring 10 targets)
4. Serial Signal I/O Circuit
See succeeding page.
NOTE: VDR is connected to the radar display unit via an optional integral interface board.
5. Sentence Description
See page 9-3 and after.
Sentence without checksum will not be accepted as a proper data.
Digital interface
(IEC 61162-1 Edition 1 and Edition 2)
-9.1-