Furuno FR-2105 Operator's Manual page 124

[ENTER WPT]
1 [ENTER WPT, NAV LINE]
2 ENTER WPT CURSOR. L/L /OWN SHIP POSN
3 WPT NO. xx
xx°xx.xxxN/S
xxx°xx.xxxE/W
2. Press [2] several times to select CURSOR, L/L or OWN SHIP POSITION whichever is
preferred, followed by [ENTER].
3. Press [3] twice.
4. a. By CURSOR:
b. By L/L: Enter latitude followed by [ENTER] and longitude followed by [ENTER].
c. By OWN SHIP POSITION: No action in this stage.
5. Enter waypoint number in two digits and press [ENTER].
6. To enter another waypoint, repeat steps 4 and 5.
The Waypoint List
To display all registered waypoints, press [NAV MENU], [1], [4] and [3]. Waypoint 00
through 09 are shown. Empty waypoints have all asterisks. To go to next page, press [0].
Pressing [1] returns to previous page.
[WPT LIST]
1 [ENTER WPT, NAVLINE]
WPT
xx xx° xx.xxxN
xxx° xx.xxxE
xx xx° xx.xxxN
xxx° xx.xxxE
xx xx° xx.xxxN
xxx° xx.xxxE
xx xx° xx.xxxN
xxx° xx.xxxE
xx xx° xx.xxxN
xxx° xx.xxxE
xx xx° xx.xxxN
xxx° xx.xxxE
xx xx° xx.xxxN
xxx° xx.xxxE
xx xx° xx.xxxN
xxx° xx.xxxE
xx xx° xx.xxxN
xxx° xx.xxxE
9 ERASE WPTxx
0 [WPT LIST 2]
Operate the trackball to place the cursor at a location desired for
waypoint.
-4.10-