Furuno FR-2105 Operator's Manual page 125

Displaying a Waypoint
A single waypoint may be shown on the display.
1. Press [NAV MENU], [2] to choose the WAYPOINT menu.
[WAYPOINT]
1 [NAV INFORMATION 1]
2 WPT MARK OFF/ON
3 WPT WPTxx
WPTxx
WPTxx
WPTxx
WPTxx
4
5
6
7 WPT DATA VIDEO PLOTTER/NAVAID
8 ARRIVAL ALARM OFF/ON
x.xxNM
VIDEO PLOTTER selected at 7 WPT DATA
3. Press [2] key twice to select WPT ON and then press [ENTER].
4. Press [3] key.
5. Enter waypoint number in two digits and press [ENTER]. Registered waypoint (01 to 98).
The latitude and longitude position of the waypoint appears on the menu and the waypoint
is displayed on the screen. Five waypoints may be displayed.
To hide a waypoint, press [3] (WPT), enter waypoint to hide, press [2] to show WPT MARK
OFF, select OFF, and then press [ENTER]
Deleting Waypoints
Waypoints can be deleted individually, or collectively through the waypoint list.
Deleting individual waypoints
1. Press [NAV MENU], [4] and [3] to display the WPT LIST 1 menu.
2. Press [0] to display the page which contains the waypoint you want to delete.
3. Press [9] and enter waypoint number in two digits.
4. Press [ENTER].
Deleting all waypoints
1. Press [NAV MENU] and [9] to display the PLOTTER ERASE menu.
2. Press [5] twice followed by [ENTER].
Waypoints used for navigation lines cannot be deleted except by editing or deleting
Note:
navigation line.
1 [NAV INFORMATION 1]
2 WPT MARK
3 WPT
4 WPT LINE
5 WPT NO.
6
7
8 ARRIVAL ALARM
NAVAID selected at 7 WPTDATA
-4.11-
[WAYPOINT]
OFF/ON
OFF/ON
OFF/ON
OFF/ON
x.xxNM