Default Setting - Furuno FCV-1200L Operator's Manual

5.6

Default Setting

The memory (all menu settings) can be cleared to start afresh. All default menu settings are
restored when the memory cleared. For your reference all default settings are shown in the
menu tree at the back of this manual.
Note: User color setting, language, target echo setting and user clutter setting are not
disturbed.
1. Rotate the [FUNCTION] switch fully clockwise to select MENU.
2. Press the [ ] key to select the menu titles at the top of the menu.
3. Press the [+] key to select SYSTEM.
4. Press the [ ] key to select DEFAULT SETTING.
5. Press the [+] key to show the DEFAULT SETTING menu.
6. Press the [+] key twice to select YES in the selection window.
Alarm beeps three times while the memory is being cleared.
7. Rotate the [FUNCTION] switch fully counterclockwise to select EXIT.
DISP ALM TX/RX USER-1/2
DEFAULT SETTING
DEFAULT SET : NO
[-/+]: Change set, [EXIT (knob)]: Exit
Default setting menu
[ ] : NO
Selection window
SYSTEM
[ ] : YES
5-7