Furuno FCV-1200L Operator's Manual page 41

4. Press the [!] or ["] key to select the alarm which you want to set.
5. Press the [-] or [+] key to show the alarm setting window.
OFF ON
Bottom alarm
6. Press the [-] or [+] key to select the alarm type desired.
7. Press the ["] key twice to select ALARM DEPTH (TEMP LIMIT for temp alarm).
8. Press the [-] or [+] key to show the alarm setting window.
9. For BOTTOM ALARM and FISH ALARM, press the [-] or [+] key to set the starting point of
alarm zone.
Alarm marker appears (Depth alarm: green, Fish alarm: white).
DISP ALM TX/RX USER-1/2 SYSTEM
BOTTOM ALARM : OFF
ALARM DEPTH : 0 ft
ALARM ZONE
FISH ALARM
ALARM DEPTH : 0 ft
ALARM ZONE : 10 ft
ALARM LEVEL : MID
TEMP ALARM
TEMP LIMIT
ALARM ZONE : 1.0˚F
Menu for alarm setting.
[-/+]: Change set, [EXIT (knob)]: Exit
*: The setting is not available when ALARM
is OFF.
ALM (Alarm) menu
OFF FISH BTM-FISH
Fish alarm
Alarm setting window
Starting depth setting window (ex. Depth alarm)
*
: 10 ft
: OFF
*
: OFF
: 65.0˚F(20~95)
*
OFF WITHIN RANGE
0 ft
OUT OF RANGE
Temp alarm
2-7