User Clutter Setting Menu - Furuno FCV-1200L Operator's Manual

3.8

USER CLUTTER SETTING Menu

The USER CLUTTER SETTING menu lets you emphasize weak to medium strength echoes.
The settings of this menu are active when selecting CUSTOM on the CLUTTER menu.
1. Press the [!] or ["] key to select color or background to change. COLOR-7 is the strongest
color.
2. Press the [-] or [+] key to show the setting window.
3. Press the [-] or [+] key to set the level (1-14).
If
you want to emphasize COLOR-7 (reddish
brown, red)
you want to emphasize middle color (yellow,
green)
you want to remove the weakest color
4. Press the [!] or ["] key to close the setting window.
5. Repeat steps 1 through 4 to set other color.
To return to default setting, select YES at DEFAULT SET.
DISP ALM TX/RX USER-1/2
USER CLUTTER SETTING
COLOR-7 : 3 (1 14)
COLOR-6 : 3
COLOR-5 : 3
COLOR-4 : 3
COLOR-3 : 3
COLOR-2 : 3
COLOR-1 : 3
BACKGROUND : 3
DEFAULT SET : NO
When the value is not suitable,
weak level is automatically adjusted.
Set clutter level to be displayed.
[-/+]: Change set, [EXIT (knob)]: Exit
USER CLUTTER SETTING menu
Setting window
SYSTEM
The larger setting
value, the wider
ratio of the color
selected.
0
then
COLOR-7, COLOR-6: set large value.
COLOR-5 to COLOR-1: set small value.
COLOR-7 to COLOR-5: set small value.
COLOR-4 and COLOR-3: set large value.
COLOR-2 and COLOR-1: set small value.
COLOR-1: set small value.
3-15