Diagnostic Test - Furuno FCV-1200L Operator's Manual
Color lcd sounder
Hide thumbs
Also See for FCV-1200L:
- Installation manual (104 pages) ,
- Operator's manual (94 pages) ,
- Service manual (71 pages)
Table of Contents
Advertisement
5.4
Diagnostic Test
The diagnostic test checks the equipment for proper operation.
1.
Rotate the [FUNCTION] switch fully clockwise to select MENU.
2.
Press the [!] key to select the menu title area at the top of screen.
3.
Press the [+] key to select SYSTEM.
4.
Press the [!] or ["] key to select TEST.
5.
Press the [+] key to open the test menu.
6.
Press the [+] key twice to select YES in the setting window.
The test screen appears.
5-4
DISP ALM TX/RX USER-1/2
TEST MODE
DIAGNOSTICS
:
NO
TEST PATTERN : NO
Press and hold [MARKER] key more than
3 sec to exit from TEST MODE.
Menu for diagnostics.
[-/+]: Change set, [EXIT (knob)]: Exit
Test menu
[
] : NO
Test setting window
SYSTEM
[
] : YES
Advertisement
Table of Contents
Troubleshooting
