Self Tests, Demonstration Display - Furuno CI-80 Operator's Manual

Self Tests, Demonstration Display

Display the system menu
Conducting self tests
MODE CALB
SELF TEST
OFF SYS ECHO PNL
DEMONSTRATION
OFF ON
WATER SPEED
T/D NAV
NAV DATA
SPD L/L
*1: Shown when tide
processor is active.
Figure 32 MODE menu
The CI-80 has four self tests and a demonstration display
which check the system for proper operation.
1. Press the DISP MODE key to select the echo display.
2. While pressing and holding down the TRIP key, press the
MENU key.
1. Press ◄ /
2. Press
3. Press
Self test menu description
SYS:
*1
ECHO: Checks receiver and transmitter.
*1
PNL:
4. Press the EVENT key to start test.
5. Press the MENU key when test is completed.
To quit the self test, Select "SELF TEST-OFF" on the MODE
menu and press the EVENT key.
►
to select the MODE menu.
/ to select SELF TEST
/ to select test.
Conducts general check of all circuit boards.
Checks key and switches of display unit.
31