Furuno 1722C Operator's Manual page 180

4. Select function desired with the cursor pad or [ENTER] knob and press the
ENTER soft key or [ENTER] knob to register your selection.
5. Press the RETURN soft key.
6. Press the [MENU] key to close the menu.
M enu Item
OFF
ADD: ADD NEW WPT
MWP: MOVE WPT
RUL: RULER
GWP: GOTO WPT
GRT: GOTO ROUTE
EML: EDIT MK/LINE
TRK: TRACK ON/OFF
TTM: TTM ON/OFF
DTT: DEL TGT TRACK
ALP: ALPHA LIST
LCL: LOCAL LIST
RTE: ROUTE LIST
DBX: D. BOX ON/OFF
CHG: CHANGE
CNTRL*
*: When selecting CHG on a display, use the same soft key number on all
display for CHG.
Plotter function keys
Function
Assigns no function.
Registers waypoint at cursor position. Place
cursor for waypoint location then press function
key.
Moves selected waypoint to different position.
Select waypoint then press function key.
Measures range and bearing between two
points. Press START POINT soft key to change
starting point if necessary. Range and bearing
between two points appears at the top of the
screen.
Specify waypoint to set as destination. Enter
number in window and press the ENTER soft
key.
Specify route to follow. Enter number in window
and press the ENTER soft key.
Displays mark & line menu. Press appropriate
soft key to access menu item.
Each pressing stops or starts recording of own
ship track.
Turns TTM (target track) display on/off.
Erases all TTM track.
Displays waypoint alphanumeric list.
Displays waypoint local list.
Displays route list.
Shows/hides data boxes.
Changes control in combination screen.
5. CUSTOMIZING YOUR UNIT
Function Key Label
—
ADD
MWP
RUL
GWP
GRT
EML
TRK
TTM
DTT
ALP
LCL
RTE
DBX
CHG
5-11