Driving Forward Or Backward - Toro TimeCutter Z4235 74365 Operator's Manual

Driving Forward or Backward
The throttle control regulates the engine speed as
measured in rpm (revolutions per minute). Place
the throttle control in the Fast position for best
performance. Always operate in the fu_ throttle
position.
The machine can spin very rapidly. The operator
may lose control of the machine and cause personal
injury or damage to the machine.
• Use caution when making turns.
• Slow the machine down before making sharp
turns.
Figure 17
1 2
2 1
Figure 16
1. Park (brake) position 3. Forward
2. Center unlock position 4. Backward
4
G004532
Forward
1. Move the levers to the center, unlocked position.
2. To go forward, slowly push the motion control
levers forward (Figure 16).
To go straight, apply equal pressure to both motion
control levers (Figure 16).
To turn, release pressure on the motion control lever
toward the direction you want to turn (Figure 16).
The farther you move the motion control levers in
either direction, the faster the machine vdll move in
that direction.
To stop, pull the motion control levers to neutral.
Backward
,
2.
Move the levers to the center, unlocked position.
To go backward, slowly pull the motion control
levers rearward (Figure 18).
II, I
G008953
Figure 18
To go straight, apply equal pressure to both motion
control levers (Figure 18).
19