Following A Route - Furuno NAVNET 1722 Operator's Manual

3.10.4

Following a route

Selecting the route to follow
1. Press the [MENU] key to open the menu.
2. Press the WAYPOINTS/ROUTES soft key.
3. Press the ROUTES soft key to open the route list.
4. Select a route.
5. Press the GOTO soft key to show the plotter display. The cursor is on the
route waypoint nearest own ship.
6. Operate the cursor pad to place the cursor on the waypoint or leg in the route
from where to start navigating the route.
7. Press the GOTO WPT or FOLLOW LEG soft key, depending on the action
taken at step 6.
A solid line runs between own ship and the first route waypoint and all other
route waypoints are connected with a dashed line. (For the 1722C/1723C series,
those lines are colored light-blue and green, respectively.) The arrows on the
lines show the direction to traverse the route.
Navigating route waypoints in reverse order
1. Do the steps 1 to 5 in the above.
2. Press the RVRSE ROUTE soft key to navigate waypoints in reverse order.
The arrows on the route line point in the direction selected.
FROM
FISH
WPT
OS
16.0 nm
WP-002
FISH
WP-001
Plotter display, route selected as destination
3. PLOTTER OPERATION
GOTO
1.3 nm
ROUTE
208.5
GOTO
WPT
RVRSE
ROUTE
RETURN
CRAB
3-49