Advertisement
3.
See figure 3b. Find the Right Leg (7). Note: The
Right Leg Is marked with a "RIGHT" s{icker.
Set a Pedal (28) on the plate at'the lower end of
the Right Leg. Note: Be careful not to attach
the Pedal backwards. Look at the curve of the
Right Leg and the front end of the Pedal to
make sure that the Pedal is turned correctly.
See figure 3a. Tum the Right Leg (7) and the
Pedal (28) upside-down as shown. Attach the
Pedal with tour #8 x 1/2" Screws (31).
.
See figure 4, Look into the upper end of the
Right Leg (7) and make sure that the Plastic
Sleeve (41) is fully inserted,
See figure 4. Find the Right Handle (11). Note:
The Right Handle is marked with a "RIGHT"
sticker. Insert the Right Handle into the Right
Leg (7).
See figure 4. Slide a 3/8" Curved Washer (27)
onto a 2" Upper Screw (25). Note: Use the
actual-size drawing to Identify the 2" Upper
Screw (25). Insert the 2" Upper Screw into the
upper hole in the Right Leg (7) and the Right
Handle (11).
See figure 4. Slide a 3/8" Curved Washer (27)
onto a 2 114"Lower Screw (26). Note: Use the
actual-slze drawing to idantify the 2 1/4"
Lower Screw (26). Insert the 2 1/4" Lower
Screw into the lower hole in the Right Leg (7)
and the Right Handle (11).
See figure 4. Make sure that the 2" Upper
Screw (25) is in the upper hole, and that the
2 114" Lower Screw (26) is In the lower hole.
The Screws must be inserted from the side
shown.
Fig. 3a
Fig. 3b
Sticker
R ght
Curves in This
Direction
Front
End.
=RIGHT"
Sticker
• ", 41
:II
//
/
,'
Sticker
/J
' '"
//
_%jI/
I
I
I
I
I
I
I
I
I
I
I
I
I
I
IJ
_
I
(I
II 2114"
Lower Screw ( 26) IIIIII
',_!
." ,! i
I
/
!
I
I
/
I
!
I
II
I
112
Note: This step requires one 2" Upper Screw (25)
and one 2 1/4" Lower Screw (26). The 2" Upper
Screw (25) must be in the uppe[ hole; the 2 !/4"
Lower Screw (26) must be |n the 10wet ii_16.
5
Advertisement
