Danby DAC6020 Use And Care Manual page 11

6_
SELECTOR Switch Function
The selector swltch conti'otsfan speed and/or
cooling speed. To set desired cooling
temperalura, simply rotate the SELECTOR
knob to the appropriate setting.
LOW FAN will circulate air at minimum speed
without cooling.
MEO FAN will circulate air at medium speed
without cooling.
HiGH FAN will circulate air at maximum speed
without cooling_
LOW COOL provides cooting with minimum alr
circulation. Recommended for night-time use..
MED COOL provides cooling with lntermediale
air circulation. Recommended for average
summer-time cooling, Once room Is cooled,
reduce setting to LOW COOL.
HIGH COOL provides cooling with maximum
air ctrculatfon. Recommended for qutck cooling
or for extremely hot days, Once room Is
cooled, reduce selling to LOW COOL.
NOTE: Always allow 3 minutes before
switching from one mode to another.
OFF shuts.down 1he unit comptetely_
4 _| tl I A
Thermostat Selector
Switch
7_
8_
THERMOSTAT
The thermostat automatically controls the
(compressor) cooling cycle and maintains the
selected room temperature. To set the
thermostat, rotate the thermostat knob 1o the
desired cooling setting (1 warmest _ 9 coldest)°
The fan motor will continue to operate alter the
compressor (cooling) has cycled off, This Is
normal,
AUTO AIR SWING
(Model DAC7003 & DAC6020):
When the Auto Air Swing switchis "ON", the
verticallouvers oscillate (side to side)
automatically sweeping coldair alternatefy
provldIng more comfortable cooling,
The vertical louvers can be stopped in any
position when the Auto Air Swing switch ts
turned "OFF",
When using FAN control, turn selector switch
slowly allowing unit to adjust.
When ustng THERMOSTAT, be sure to allow three
minutes before changing temperature. Adjusting
too qu[ckly may cause en overload resulting In a
b!own fuse.
Fresh Air Ventitation is usually kept in the closed
position. Use onIy when clearing smoke and/or
odors from the room,.
10
0
Fresh Air
- Ventiialion
Switch