Table of Contents
Advertisement
Speed Adjustment
Adjust speed when you select own speed source "OWN PDDWHL".
1. Press the [MENU] key.
2. Press the software key labeled "DISPLAY OPTIONS".
3. Press the software key labeled "NEXT PAGE" to display the following display.
s SPEED SOURCE
SPD
12.3kt
DGPS 3D
Figure 3-12 Display Setup 2 Display
4. Select "SPEED ADJ." by the arrow key.
5. For speed sensor-equipped sets, you may offset the speed readout if it is wrong.
Run the boat at various speeds and watch the speed readout at the bottom of
the screen. If it is unreasonably wrong, press the software key "EDIT" to dis-
play the following message.
Figure 3-13 Speed Adjustment Display
6. Correct speed readout by the arrow key. The adjustment range is -50%~+50%.
For example, if readout is 10% lower than actual speed, enter +10%.
7. Press the software key "RETURN".
8. Press the [PLOT] key to finish.
Temperature Adjustment
1. Press the [MENU] key.
2. Press the software key labeled "DISPLAY OPTIONS".
3. Press the software key labeled "NEXT PAGE" to display the following display.
TEMP SOURCE
TEMP GRAPH
ZOOM MARKER
SPEED ADJ.
TEMP ADJ.
DEPTH ADJ.
TEMP
62.5 F
SPEED ADJ
+ 00 %
3-8
DISPLAY
GPS
SETUP2
OWN XDCR
OFF
EDIT
OFF
+00%
+00.0 F
+0.0ft
DEPTH
2000.0ft
RETURN
Advertisement
Table of Contents
