Antenna Height; Baud Rate Setting (Gp-1850D Only) - Furuno GP-1850 Installation Manual

3.3 Antenna Height

1. Press the [MENU] key.
2. Press the software key labeled "GPS/DGPS/TD OPTIONS".
3. Press the software key labeled "GPS SETUP OPTIONS".
4. Select "ANT. HEIGHT" by the arrow key.
5. Press the software key labeled "EDIT".
6. Enter the height (3 digits) of the antenna above sea level using the numeric
keys.
If you enter wrong antenna height, press the software key labeled "CLEAR".
7. Press the [ENTER] key.
8. Press the [PLOT] key to finish.

3.4 Baud Rate Setting (GP-1850D only)

This setting may not be done when selecting AUTO MODE.
1. Press the [MENU] key.
2. Press the software key labeled "GPS/DGPS/TD OPTIONS".
3. Press the software key labeled "DGPS SETUP OPTIONS" to display the fol-
lowing message.
Figure 3-4 Antenna Height Display
s FORMAT
DGPS MODE
BEACON FREQUENCY
BEACON BAUD RATE
s
DGPS ALARM
DGPS 3D
Figure 3-5 DGPS Setup Options Display
ANT. HEIGHT
0 0 5 m
NMEA 0183
ON
VER 1.5
AUTO
AUTO
OFF
3-4
DGPS
OPTION
EDIT
RETURN