Entering Routes - Furuno GP-1600F Operator's Manual

Setting destination by event position
1) Press the [WPT] key.
2) Press the [ ] key to select Event List.
3) Press the [NU/CU ENT] key. The event list appears.
4) Press the [ ] or [ ] key to select event point.
5) Press the [NU/CU ENT] key.
Cancelling destination waypoint
1) Press the [GOTO] key.
2) Press the [CLR] key.
3) Press the [NU/CU ENT] key.
4) Press the [MENU ESC] key twice.

2.11 Entering Routes

Often a trip from one place to another involves several course
changes, requiring a series of route points (waypoints) which you
navigate to, one after another. The sequence of waypoints leading
to the ultimate destination is called a route. The GP-1600F can
automatically advance to the next waypoint on a route, so you do
not have to change the destination waypoint repeatedly.
Destination
04
03
02
01
Own Ship
00
Figure 2-17 Sample route
You can store up to 20 routes. They are numbered from 01 to 20 on
the route list. A route may consist of 30 points.
A route can be constructed two ways: through the route list or by
using the cursor.
2 – 14