Shifting The Plotter Display - Furuno GP-1600F Operator's Manual

2.6 Shifting the Plotter Display

2 – 6
Centering ship's position
1) Press the [CURS] key to turn off the cursor if it is currently
displayed.
2) Press the [CNTR] key.
Note: NAVIONICS chart may not center ship's position perfectly.
Centering a location
1) Press the [CURS] key to turn on the cursor if it is not currently
displayed.
2) Operate the [Arrow] keys to set the cursor on the location you
want to center.
3) Press the [CNTR] key.
Note: NAVIONICS chart may not center cursor position perfectly.
Scrolling the display
1) Press the [CURS] key to turn off the cursor if it is currently
displayed.
2) Operate the [Arrow] keys to scroll the display in direction de-
sired.
The display is scrolled when the cursor reaches an edge of the
screen.