Anchor Watch Alarm; Xte (Cross Track Error) Alarm - Furuno GP-1850F Operator's Manual

9.4 Anchor Watch Alarm

The anchor watch alarm informs you that your
boat is moving when it should be at rest.
When the anchor watch is active, a red
dashed circle marks the anchor watch area.
Alarm
setting
Your ship's position
where you start the
anchor watch alarm.
Figure 9-5 How the anchor
watch alarm works
1. Press the [ALARM] key to open the alarm
menu.
2. Press or to select ANCHOR ALARM.
3. Press the soft key EDIT to open the an-
chor alarm window.
ANCHOR ALARM
ON 0.050nm
'
™ OFF
Figure 9-6 Anchor watch alarm window
4. Press to select ON.
5. Key in the alarm range desired. The an-
chor watch range is 0.001 to 9.999 miles.
6. Press the soft key ENTER or the [ENTER]
key to register your selection.
9-2
9.5 XTE (Cross Track Error)
The XTE alarm warns you when your boat is
off its intended course. When the XTE alarm
is active two red dashed lines mark the XTE
alarm area.
Own ship's
position
: Alarm
area
1. Press the [ALARM] key to open the alarm
2. Press
3. Press the soft key EDIT to open the XTE
4. Press
5. Key in the alarm range desired. The XTE
6. Press the soft key ENTER or the [ENTER]
Alarm
Alarm
setting
: Alarm
Figure 9-7 How the XTE alarm works
menu.
or to select XTE ALARM.
alarm window.
XTE ALARM
ON 0.100nm
'
™ OFF
Figure 9-8 XTE alarm window
or to select ON.
alarm range is 0.001 to 9.999 miles.
key to register your selection.
Destination
waypoint