Plotter Displays; Presentation Modes - Furuno GP-1650 Operator's Manual

2.1 Presentation Modes

The plotter display mainly shows chart, ship's
track, waypoints, and navigation data.
Three types of display presentations are pro-
vided for the normal plotter display: north-up,
course-up and auto course-up. To change the
mode, use the presentation mode selection
soft key, which is the 3rd soft key from the
top.
North-up
Press the soft key NORTH UP to show the
north-up display. North (zero degree) is at the
top of the display and own ship is at the cen-
ter of the screen. Own ship marker is a filled
circle. This mode is useful for long-range
navigation.
Course bar
Nav information
window
34 12.345' N
135 12.345' E
002WP
FISH
DGPS 3D
Icon (chart)
GPS status
Waypoint name
Waypoint mark
Figure 2-1 Plotter display, north-up mode
Functions for
soft key
Current display mode
(north-up)
Track
NORTH
CSE 245.8
16.3kt
UP
SPD
ZOOM
IN
ZOOM
OUT
COURSE
UP
BRIDGE
NAV
WPT
Own ship
marker

2. PLOTTER DISPLAYS

Course-up
Press the soft key COURSE UP to show the
course-up display. When destination is set it
is at the top of the screen, the north mark
appears at the upper left side of the screen
and points to north. A filled triangle marks own
ship's position.
When destination is not set, the course or
heading is upward on the screen at the mo-
ment the course-up mode is selected.
34 12.345' N
135 12.345' E
DGPS 3D
Figure 2-2 Plotter display, course-up mode
Auto course-up
Press the soft key AUTO C.U. to show the
automatic course-up display. The course or
heading is at the top of screen at the mo-
ment the course-up mode is selected. When
own ship is off its intended course by 22.5
or more, it is automatically brought back to
perpendicular.
34 12.345' N
135 12.345' E
DGPS 3D
Figure 2-3 Auto course-up mode
COURSE
CSE 245.8
16.3kt
SPD
ZOOM
QP<01>
ZOOM
OUT
AUTO
C.U.
NAV
WPT
CSE 245.8 AUTO
16.3kt
SPD C-UP
ZOOM
ZOOM
OUT
NORTH
UP
NAV
WPT
UP
IN
IN
2-1