Advertisement
CAUTION: W hile
it is possible for one person to assemble this grill, obtain assistance from another person when
handling some of the larger, heavier pieces, especially the grill head.
1. During unpacking and assembly always wear work gloves and eye protection.
2. Open Lid of shipping carton and remove top sheet of cardboard. Lay cardboard sheet on floor and use as a work
surface to protect floor and grill parts from scratches.
3. Remove packing materials and cart parts from shipping carton.
4. You may slice the carton front corners with a utility knife to lay open the carton front panel. This will allow you to
raise the grill head Lid and remove the components packed inside the head, making it easier to lift.
5. With an assistant, lift the grill head out of the shipping carton and place it on the cardboard work surface.
6. Use the parts list to check that all parts have been included.
7. Inspect the grill for damage as you assemble it. Do not assemble or operate the grill if it appears damaged. If
there are damaged or missing parts when you unpack the shipping box, or you have questions during the
assembly process, call the:
Grill
Information
Center
1-888-317-7642
8am - 8pm CST, Monday through
Friday
_1_
Assembling
The
Cart
To
The
Grill
Head
Lay the Grill Head flat on its back as shown. Cut Fastening
Bands from folded Cart Legs.
Unfold the 4 pre-assembled
Cart Legs. Insert 4 screws provided
as shown and tighten securely.
Pattern
Head
Screw
1/4"xl/2"
Qty. 4
Ref. # $132G04082
13
Advertisement
