Selecting The Alarm Buzzer; Selecting The Beep Pattern - Furuno NAVpilot-500 Operator's Manual

5. ALARMS
5.1.1

Selecting the alarm buzzer

You may choose the buzzer from which to output the audio alarm as follows.
1. Rotate the [ENTER] knob to select "AUDIO ALARM" from the ALARM menu.
2. Press the [ENTER] knob to show the audio alarm options window.
3. Rotate the [ENTER] knob to select INTERNAL BUZZER or
INTERNAL+EXTERNAL BUZZER as appropriate.
INTERNAL BUZZER: Sounds the buzzer in the control unit.
INTERNAL+EXTERNAL BUZZER: Sounds the control unit buzzer and external
buzzer if connected.
4. Press the [ENTER] knob.
5.1.2

Selecting the beep pattern

The sound pattern of the audio alarm can be selected as follows.
1. Rotate the [ENTER] knob to select "ALARM INTERVAL" from the ALARM
menu.
2. Press the [ENTER] knob to show the alarm interval options window.
3. Rotate the [ENTER] knob to select SHORT, LONG or CONTINUE as
appropriate.
CONTINUE: Beep sounds continuously.
4. Press the [ENTER] knob.
5-2
INTERNAL BUZZER
INTERNAL +EXTERNAL BUZZER
Audio alarm options window
SHORT
LONG
CONTINUE
Alarm interval options window
200 ms
SHORT pattern
800 ms
400 ms
LONG pattern
800 ms