AUTOPILOT Operator’s Guide The purpose of this Operator's Guide is to provide basic operating procedures for this equipment. For more detailed information see the Operator's Manual. Operating controls STBY key Selects the STBY (manual) mode. MENU key Opens the mode menus. NAV key Selects the NAV mode.
Page 2
3. Press the [NAV] key to go into the NAV mode. This mode is used in connection with a navigational aid, such as GPS navigator. In this mode, current and weather will have little affect on the boat’s track line.
Page 3
Using the TURN mode The [TURN] key provides the various turning motions depending on the used mode. The arrows show the direction to turn. ORBIT SPIRAL ORBIT ORBIT SPIRAL SPIRAL FIGURE EIGHT FIGURE EIGHT STBY, NAV mode AUTO mode Rotate the [ENTER] knob to select turn mode desired, and then press the [ENTER] knob.
REMOTE mode 1. Turn on the remote controller switch to show “FU” or “NFU” on the control unit. For dodge type, there is no power switch. Dial type Button type Lever type PUB. No. OSE-72500-D (2003/12, HIMA) 2. Steer the boat by using the remote controller.